Corte a laser de aço carbono
Laser Cutting Carbon Steel Type
MAGICK laser cutting machines process a range of carbon steels. Find the right cutting setup for your steel grade, thickness and application.
Low Carbon Steel Laser Cutting
Carbon content: ≤ 0.25%
Low carbon steel is generally easy to laser-cut using oxygen or nitrogen, depending on the material thickness and available laser power. With the proper parameter settings, it is possible to achieve cuts with smooth edges, near-right-angle corners, and minimal slag.
Medium Carbon Steel Laser Cutting
Carbon content: 0.25% < C ≤ 0.60%
Select the appropriate cutting parameters based on the steel grade and thickness. When edge quality is critical, inspect the hardness of the cut edge and the heat-affected zone.
High Carbon Steel Laser Cutting
Carbon content: > 0.60%
The rapid heating and cooling that occur during laser cutting may cause the cut edges to harden. Before beginning full-scale production, please perform a test cut and check the cut edges for hardening or cracks.
Why Laser Cutting Is Ideal for Carbon Steel?
As a widely used engineering material, carbon steel is widely used in both everyday life and industrial applications due to its exceptional properties. In traditional carbon steel processing, inadequate equipment often results in defects such as scarring, cracks, delamination, white spots, impurities, and porosity. Therefore, metal laser cutting machines—which are well-suited to modern needs—have become the ideal choice for carbon steel processing.
Carbon steel absorbs laser energy effectively, allowing the focused beam to rapidly heat the cutting line. When oxygen is used as an assist gas, it reacts with the high-temperature steel and releases additional heat, further increasing the cutting speed.
Laser cutting produces cuts with smooth edges, minimal burrs, and a narrow heat-affected zone, thereby reducing the need for secondary processing. For suitable thin-gauge sheet metal, dimensional tolerances of ±0.1 millimeters can be achieved. The cutting head maintains a distance from the workpiece, avoiding direct mechanical stress during the cutting process.
CNC technology makes it possible to cut complex shapes in carbon steel sheets, tubes, and profiles. It also supports automated production, ensuring consistent part dimensions and high material utilization.
Carbon Steel Laser Cutting Thickness and Power
Escolhendo a potência correta do laser
When choosing laser power for carbon steel cutting, start with your usual plate thickness and required edge finish. The maximum thickness shows how thick a plate can be cut through under suitable conditions. If you need clean edges and consistent results, use the high-quality cut column as your starting point.
These figures are approximate. Actual results depend on the steel grade, assist gas, machine configuration, and cutting settings. Some 12 kW setups can cut carbon steel around 35 mm thick. Use a test cut to confirm the speed and edge finish you need for production.
Carbon Steel Cutting Thickness by Laser Power
| Potência do laser | Approx. Maximum Thickness | High-Quality Cut Reference |
|---|---|---|
| 500 W | About 6 mm | Up to about 3 mm |
| 1,000 W | About 10 mm | Up to about 6 mm |
| 2,000 W | About 16 mm | Up to about 12 mm |
| 3,000 W | About 20 mm | Up to about 16 mm |
| 6,000 W | About 25–30 mm | Up to about 20 mm |
| 12,000 W and above | About 35–40 mm or more | Confirm with a test cut |
Assist Gases and Cutting Characteristics
Oxygen Cutting
Reactive cutting
Oxygen cutting is the most commonly used method for carbon steel. Oxygen reacts exothermically with the steel, adding heat to the cutting process. This can significantly increase cutting speed and extend the maximum cutting thickness, from thin sheet to medium and thick plate. The trade-off is a wider kerf, a larger heat-affected zone and an oxidized cut edge that usually needs cleaning before painting or powder coating.
Nitrogen Cutting
Fusion cutting
Nitrogen cutting is suitable for carbon steel parts where edge oxidation must be strictly controlled, or for parts that will later be welded or coated. It produces a silver-white cut face without an oxide layer. Because nitrogen does not react with the steel.
Carbon Steel Laser Cutting FAQs
Can a Fiber Laser Cut Carbon Steel?
Yes. Fiber lasers can cut low-, medium-, and high-carbon steel. The cutting setup depends on the steel grade and thickness. For high-carbon steel, test cuts can help identify edge hardening or cracking before production.
What Thickness of Carbon Steel Can a Laser Cut?
It depends on laser power, the steel grade, assist gas, and cutting settings. The reference table on this page lists approximate maximums from about 6 mm at 500 W to about 35–40 mm or more at 12 kW and above. These are not guaranteed production-quality thicknesses; confirm the required edge finish with a test cut.
What Laser Power Is Best for Carbon Steel Cutting?
Choose power based on the thickness you cut regularly and the edge quality you need, rather than maximum cutting thickness alone. As a reference, this page lists high-quality cuts up to about 16 mm at 3 kW and up to about 20 mm at 6 kW. Confirm the final configuration using your own material and parts.
Is Oxygen or Nitrogen Better for Carbon Steel Laser Cutting?
Oxygen is commonly used for carbon steel because its reaction with the steel adds heat, but it leaves an oxidized cut edge. Nitrogen is suitable when edge oxidation must be controlled, producing an oxide-free, silver-white cut face. Choose according to the plate thickness, required edge finish, and later welding or coating needs.
How Do You Choose a Carbon Steel Laser Cutting Machine?
Start with your steel grade, usual plate thickness, sheet size, production volume, and enclosure requirements. MK-S offers a flexible single-table setup, MK-E supports batch production with exchange tables, MK-P has an enclosed cutting area, and MK-H suits large-format and thick-plate work.
Produtos relacionados
Máquina de corte a laser de fibra com mesa única MK-S
A flexible sheet metal cutting solution with an open-table design, suitable for small workshops and diverse carbon steel processing needs.
Ver detalhes do MK-S →
Máquina de corte a laser de fibra com mesa de troca MK-E
An exchange-table design that reduces loading downtime and supports efficient batch production of carbon steel sheets and metal components.
Ver detalhes do MK-E →
Máquina de corte a laser de fibra totalmente fechada MK-P
A fully enclosed sheet laser cutting solution featuring protective viewing windows and an enclosed cutting area for a safer production environment.
Ver detalhes do MK-P →
Máquina de corte a laser de grande formato MK-H
A large-format, high-power solution suited to thick carbon steel plate processing.
Ver detalhes do MK-H →Artigos relacionados

Corte a laser de chapas de aço: um guia prático para fabricantes
Saiba como funciona o corte a laser de chapas de aço, como avaliar o corte de 20 mm, a qualidade das bordas e o custo, e como escolher a máquina de laser de fibra adequada.

Guia de compra de cortadoras a laser de fibra: potência, preço e especificações principais
Compare a potência, os preços e as principais especificações das cortadoras a laser de fibra. Encontre a configuração ideal e solicite um orçamento personalizado.

Como funciona um cortador a laser?
Como funciona uma cortadora a laser? Saiba como a focalização do laser, o gás auxiliar e o movimento CNC proporcionam um corte preciso em metal.