Hybrid Laser Cutting Machine for Metal & Nonmetal
MK-DC Metal and Nonmetal Laser Cutting Machine
The MK-DC metal and nonmetal laser cutting machine helps sign makers, small fabrication shops, and prototyping teams process different materials without outsourcing every revision or maintaining separate cutting workflows. Its compact enclosed design supports in-house production of custom metal signs, logos, acrylic lettering, wood décor, prototypes, and small-batch parts, making it easier to move from design changes to trial cutting within a limited workspace.
- Brand
- MAGICK
- Series
- MK-DC Series
- Model
- MK-3030DC
- Product Warranty
- 2–3 Years
- Machine Type
- Metal and Nonmetal Laser Cutting Machine
- Laser Configuration
- Fiber Laser and CO2 Laser
- Compatible Materials
- Metal, Acrylic, Wood and Other Compatible Sheets
- Best For
- Signs, Prototypes and Small-Batch Parts
Compact enclosed design for workshops with limited space
Produce custom signs, logos, lettering, décor, and small parts
Key Advantages of the MK-DC Laser Cutting Machine
Fit Metal Cutting into a Smaller Workspace
Limited workshop space can make it difficult to add a dedicated cutting station. The MK-DC uses a compact desktop design for small metal parts, signs and prototypes. Its footprint helps small fabrication shops and development teams plan a cutting workstation around existing equipment, keeping sample production close to the people who design and assemble the parts.
- Compact desktop layout for limited work areas
- Designed around small metal workpieces
- A practical cutting station for sign shops
- Keep prototype cutting close to assembly
Reduce Cooling Maintenance with an Air-Cooled Fiber Laser
Managing a water chiller and coolant lines adds routine work to a small shop. The MK-DC uses a JPT 800 W air-cooled fiber laser source to reduce those cooling requirements. With fewer water-cooling components to manage for the laser source, your team can spend less time checking coolant and more time preparing jobs.
- JPT 800 W fiber laser source
- Air cooling for the fiber laser
- Fewer laser-source water circuits to maintain
- Simpler routine cooling management
Plan Installation Around Single-Phase Power
Adding equipment can be difficult when a workshop has no three-phase supply. This MK-DC configuration uses 220 V, 60 Hz single-phase power, making installation easier to plan where that electrical specification is available. Match the circuit capacity to the machine's total input power before installation, so the cutting station suits your site's electrical infrastructure.
- 220 V, 60 Hz single-phase configuration
- Suitable for sites with a matching power supply
- No three-phase connection for this configuration
- Circuit sizing based on total machine input power
Produce Custom Laser Cut Metal Signs and Prototypes
Waiting for outsourced samples slows design changes and customer approvals. The MK-DC supports carbon steel and stainless steel contour cutting for custom laser cut metal signs, decorative pieces and small hardware. Bringing trial cuts in-house helps your team revise artwork, check part fit and adjust processing parameters before committing to a small production run.
- Produce small metal letters, logos and sign components
- Trial-cut prototypes before batch production
- Revise drawings and inspect samples in the same workshop
- Match thickness and edge quality through sample testing
Material compatibility: For hybrid laser cutting machine requirements, confirm a configuration with both fiber and CO2 laser sources. This metal and nonmetal laser cutting machine configuration differs from the 800 W metal-cutting version described above.
Recommended Cutting Parameters
| Material | Thickness | Laser Type | Laser Power (Air-Cooled) |
Cutting Speed | Assist Gas | Gas Pressure |
|---|---|---|---|---|---|---|
| Carbon Steel | 1–6 mm | Fiber Laser | 800 W | 1500–3000 mm/min | Oxygen | 0.2–0.4 MPa |
| Carbon Steel | 1–8 mm | Fiber Laser | 1200 W | 1000–2500 mm/min | Oxygen | 0.3–0.5 MPa |
| Stainless Steel | 0.5–2 mm | Fiber Laser | 800 W | 1200–2200 mm/min | Nitrogen | 0.5–0.7 MPa |
| Stainless Steel | 0.5–3 mm | Fiber Laser | 1200 W | 1000–2000 mm/min | Nitrogen | 0.6–0.8 MPa |
| Acrylic | 3–8 mm | CO2 Laser | 80 W | 800–1500 mm/min | Compressed Air | 0.3–0.5 MPa |
| Wood | 5–12 mm | CO2 Laser | 80 W | 600–1200 mm/min | Compressed Air | 0.2–0.4 MPa |
| Aluminum | 0.5–1 mm | Fiber Laser | 1200 W | 800–1800 mm/min | Nitrogen | 0.6–0.8 MPa |
Laser-Cut Metal Samples
Certifications & Qualifications
ISO 9001:2015 Quality Management System
CE EMC & LVD Certification
EAC Declaration of Conformity
