Laser Cut Brass
LASER CUTTING BRASS TYPE
MAGICK laser cutting machines process a range of brass. Find the right cutting setup for your brass alloy, thickness and application.
Brass Thin Foils and Strips
cutting thickness: 0.02 mm - 0.5 mm
Brass foil and strips (0.02 mm – 0.5 mm).
These materials can be used for high precision micro-cutting with small- to medium-power fiber lasers or UV lasers, and are commonly used in battery electrodes, precision gaskets, and electronic components.
Laser Cut Brass Sheet
cutting thickness: 1 mm - 30 mm
Thick brass plate calls for a fiber laser cutter with back-reflection protection.
Raycus lists a 30 mm trial cut at 2–2.5 m/min with a 40 kW fiber laser and nitrogen at 18 bar. This setting is for sample cuts or small batches and is not recommended for routine mass production.
Brass Pipe Cutting
cutting thickness: 1 mm - 14 mm
Brass pipes and profiles. Using a specialized laser tube-cutting machine, it is possible to perform hole-cutting, parting, and beveling on round, square, and custom-shaped brass tubes.
5 Advantages of Fiber Laser Cutting for Brass
A fiber laser cutting machine offers five advantages when you need to laser cut brass for industrial production or custom work.
High precision and smooth edges. A tightly focused fiber laser produces a narrow kerf and a small heat-affected zone. It can leave smooth, burr-free edges, so parts can go straight to assembly without extra grinding.
Non-contact cutting. The laser beam cuts without touching or pressing on the brass. This helps prevent the distortion and surface scratches that punching or shearing can cause on thin-walled or precision brass parts.
Fast cutting. On thin and medium-thickness brass sheets, fiber laser cutting can be much faster than wire EDM or waterjet cutting, shortening lead times for production batches.
Flexible production without dies. Import a CAD drawing and cut the part directly, without paying for dies or stopping to change them. This is useful for intricate cutout patterns, prototypes, and small custom orders.
Lower operating and maintenance costs. A fiber delivery system eliminates the need for complex mirror alignment. High electrical efficiency and low consumable use can reduce electricity and maintenance costs over time compared with conventional equipment.
See How a Fiber Laser Cuts 8mm Brass
Brass Laser Cutting Thickness and Power
Choosing the Right Laser Power
The reference data covers 1–4 mm brass at 2 kW, 1–6 mm at 4 kW, and 1–10 mm at 6 kW. For thicker parts, 12 kW extends the range to 14 mm. Check cutting speed and edge quality with a sample cut before production.
The table below summarizes nitrogen-assisted brass cutting data from the Raycus parameter database. Reference ranges exclude trial-cutting entries; maximum listed thicknesses include them where marked with an asterisk.
Brass Cutting Thickness by Laser Power
| Laser Power | Reference Cutting Range | Maximum Listed Thickness |
|---|---|---|
| 2 kW | 1–4 mm | 4 mm |
| 3 kW | 1–5 mm | 6 mm* |
| 4 kW | 1–6 mm | 8 mm* |
| 6 kW (34 / 75 μm core) | 1–10 mm | 12 mm* |
| 12 kW | 1–14 mm | 16 mm* |
| 15 kW | 1–16 mm | 20 mm* |
| 20 kW | 1–18 mm | 20 mm* |
| 30 kW | 2–18 mm | 20 mm* |
| 40 kW | 5–25 mm | 30 mm* |
* Trial-cutting parameter: suitable for sample cutting or small batches, not recommended by the source for routine mass production.
Ranges summarize the thicknesses listed in the database, not guaranteed production limits or minimum cutting capabilities. Actual results vary with brass alloy, machine configuration, and required edge quality.
Laser Cut Brass FAQ
Can you laser cut brass sheets?
Yes. A fiber laser can cut brass sheets. The Raycus reference data for nitrogen-assisted cutting lists 1–4 mm at 2 kW, 1–5 mm at 3 kW, 1–6 mm at 4 kW, and 1–10 mm at 6 kW. Use these ranges as a starting point and check cutting speed and edge quality on a sample of your brass before production.
How to laser brass?
When using lasers to process brass (such as for laser cutting, marking, or engraving), the main challenges are its high reflectivity and high thermal conductivity. Modern industry typically uses fiber lasers (with a wavelength of approximately 1,064 nanometers) to process brass efficiently.
Can a CO₂ laser cut brass?
Theoretically, yes, but the results are poor and the risks are high, so it is generally not recommended; fiber lasers are the preferred choice for cutting brass. Brass is a copper-zinc alloy that exhibits very high reflectivity (up to 90% or more) toward the 10.6 µm CO₂ laser wavelength in its solid state, resulting in low energy absorption and poor cutting efficiency. CO₂ lasers are used only in specific scenarios, such as for extremely thin brass (1 mm–2 mm) or low-cost test cuts, but strict safety precautions are required.
Can a UV laser cut brass?
A UV (ultraviolet) laser can cut brass, but only extremely thin brass foil or sheets requiring micron-level precision; it is not suitable for cutting brass sheets of standard thickness. Industrial-grade UV lasers typically have low power output (usually ranging from 0.1 W to 50 W), so they can only cut brass foil ranging from the micron level to a few tenths of a millimeter in thickness (commonly used in the resistor industry).
What Gas Is Used for Laser Cutting Brass?
Nitrogen (N₂) is the primary gas used for laser cutting brass. If cost is a concern and edge oxidation is not a major issue, compressed air can be used as an economical alternative. It is important to note that high-pressure gas must be used. Regardless of whether nitrogen or air is chosen, cutting brass requires high gas pressure (typically in conjunction with a single-layer nozzle) to quickly blow away the viscous molten metal and prevent slag buildup.
What to Keep in Mind When Laser Cutting Brass?
When laser cutting brass, the key considerations are preventing highly reflective laser beams from damaging the optical lenses and optimizing cutting parameters to account for its high thermal conductivity. Because brass has an extremely low laser absorption rate and dissipates heat very quickly, it is significantly more difficult to machine than carbon steel and stainless steel.
How Do I Choose a Brass Laser Cutting Machine?
Mainly cutting 1–3 mm, small batches: Start with a 3 kW machine for prototyping; make a decision after confirming production capacity.
Mainly cutting 1–3 mm, continuous production: 6 kW is usually a more reasonable starting point; don’t assume that 12 kW will necessarily be faster.
Frequently cutting 4–6 mm: Prioritize comparing 6 kW and 12 kW; 3 kW is not recommended as the first choice for stable batch production.
Large orders of 6 mm material: A 12 kW machine warrants thorough testing, but a full nesting layout must be used to compare total processing time and nitrogen costs for the entire batch.
Frequent cutting of material thicker than 6 mm: Do not base your decision solely on the power rating; representative batch test cuts must be performed.
Regardless of the power rating chosen: You must verify protection for highly reflective materials, the scope of the brass warranty, nitrogen capacity, and fume extraction capabilities.
Related Products
MK-S Single Table Fiber Laser Cutting Machine
An open single-table cutter for prototypes and short sheet metal runs, with easy access for loading and unloading.
View MK-S Details →
MK-E Exchange Table Fiber Laser Cutting Machine
Load the next sheet on one table while the other is cutting to reduce waiting time between sheets in a production run.
View MK-E Details →
MK-P Fully Enclosed Fiber Laser Cutting Machine
A fully enclosed sheet cutter with viewing windows so operators can monitor cutting with the doors closed.
View MK-P Details →
MK-H Large Format Laser Cutting Machine
A large-format sheet cutter with configurable bed sizes for oversized panels and long plate parts.
View MK-H Details →Related Articles

Laser Cutting Steel Sheet: A Practical Guide for Manufacturers
Learn how laser cutting steel sheet works, how to assess 20 mm cutting, edge quality and cost, and how to choose the right fiber laser machine.

Fiber Laser Cutter Buying Guide: Power, Price & Key Specs
Compare fiber laser cutter power, prices and key specs. Find the right configuration and request a tailored quote.

How Does a Laser Cutter Work?
How does a laser cutter work? Learn how laser focusing, assist gas, and CNC motion create precise metal cut.